How Much Does It Cost to Replace a Bathroom, Kitchen, Bathtub, Shower, and Outside Faucet?

Want to know how much it costs to replace the faucets all over the house? 

Are you unsure whom to believe when it comes to the cost of plumbing? Trust me, you’re not the only one. 

Yes, we know that it’s expensive. But we also need honest answers to the actual cost of plumbing.

So, here I am with another blockbuster Q/A article about the cost of replacing the bathroom, kitchen, bathtub, shower, and outside faucets. You will find the cost structure of most household faucets and even some installation tips! 

Cost To Go Tankless Water Heater Un...
Cost To Go Tankless Water Heater Under $500 E02 || Review Atmor ThermoPro

Enjoy!

How Much Does It Cost to Replace a Bathroom Faucet?

The cost of materials in replacing a bathroom faucet may vary from $69 to $152 depending on which state you’re living in, the condition of your faucet, and the amount of work assigned to the plumber. Therefore, the average material cost of replacing a bathroom faucet is $111. 

On top of that, if you include labor cost to the material cost of replacing a bathroom faucet, it can cost around $250 to $350. Generally, a good plumber takes about 30 minutes to remove an old faucet and install a new one. Some plumbers may even charge for the disposal, but it’s not always the case. 

How Much Does It Cost to Replace a Kitchen Faucet?

A bathroom and kitchen faucet may cost the same. But if the design of the sink is different, the cost will vary as well. On average, the cost of replacing a kitchen faucet maybe around $253. 

But the cost is changeable based on the condition of the pipes, the sink, and the type of tap you are installing. In that case, a plumber may charge between $162 and $354. A high-end faucet can cost about $575 just to install it!

How Much Does It Cost to Replace a Bathtub Faucet?

Now, let’s investigate the price of installing a bathtub faucet. A bathtub faucet is different from a bathroom sink and kitchen faucets. It usually has a lever, a knob, a cross handle, a showerhead, and the water flow rate is much higher than regular faucets. 

Since its mechanism is more complicated than that of a typical sink faucet, a plumber may charge you between $300 and $400 to remove an old bathtub faucet and install a new one. 

How Much Does It Cost to Replace a Shower Faucet?

To install a shower faucet, you may need to spend between $147 to $350. The average material cost of replacing a shower faucet is usually $249. So, if you add labor cost to that, it’s $562 for both the material and labor cost of replacing a shower faucet.

How Much Does It Cost to Repair a Shower Faucet?

The material cost needed to fix a shower faucet is $26. When you add labor cost to that amount, the total cost of repairing a shower faucet stands at $196. 

Now, that is just an average amount. Depending on your location, condition of the pipes, and other plumbing costs, your plumber may charge you between $178 and $214.

How Much Does It Cost to Replace an Outside Faucet?

Why not talk about outdoor faucets now? These faucets cost $10 to $60 for the parts, and the labor may cost between $150 and $200 per hour. On the other hand, the cost of repairing an outside faucet may come to $100 or $300 depending on the type of work you’re getting done. 

How to Replace an Outside Faucet?

Before you call the plumber, see if you can fix the problem by yourself. If the handle of the faucet is leaking, first tighten the nut to see if it’s resolved. Then, get a new washer and replace the old one. 

If it’s leaking between the joint and the supply pipe, see if you can remove the faucet. Clean the threads and then secure them with Teflon tape. 

Then again, if the spout is leaking, you should get a new tap to replace it as it’s probably damaged inside. 

How Much Does It Cost to Replace a Shower Valve?

A shower valve is quite important in the sense that you need it for temperature and water pressure control. However, replacing this important instrument is not cheap. 

You will need to spend atleast $50 to $400 based on the nature of the problem. On average, that is $225.

Moreover, if your shower valve is single-handled, you could be spending about $50 to fix it. A busted shower valve can cost you $20 or $30. 

The replacement cost of a two-handled shower valve is $75 on average. But there are two types of two-handled shower valves. 

One can control the water pressure and temperature separately. This one costs $110 on average for replacement. 

On the contrary, the other type of two-handled shower valve can control the water flow with one valve, and water pressure and temperature with the other. These ones can cost you about $130. 

How Much Does a Plumber Charge to Change a Faucet?

If you just want to know the plumbing charges for changing any type of faucet, expect to spend about $45 to $150 per hour for labor. On top of that, an average faucet may cost about $100 to $350. 

Therefore, if we do the maths, you may have to spend $120 to $300 when you call a plumber to install your faucet. Lastly, the three-handled shower valve will cost $85 on average for replacement. 

When Should You Replace Your Household Faucet?

There are three major signs that you need to look out for before planning to replace your household faucet. Firstly, is it dripping? If your tap is always dripping even when you have locked it tightly, it may be due to a broken valve or high water pressure. 

Secondly, is it spitting? Sometimes, you may notice your faucet spitting out water, instead of letting it flow normally. This may be caused due to a broken internal system. 

And thirdly, is it squeaking? A squeaky faucet may present a deeper problem, and you need a plumber to fix it. 

How to Install a Faucet by Yourself?

I can understand why you may feel reluctant to call the plumber and spend a fortune on a single faucet. Is there a way to do it yourself?

Yes! All you need is some basic knowledge about plumbing, which you can learn from Google. Having an instruction manual is essential for the faucet you’re trying to install. 

Faucets can come in various shapes, types, and technical features. So, make sure you are following a guideline.

So This is What You Takeaway

Let’s state the obvious, plumbing is super expensive!! You can’t blame some people for not wanting to call the plumber and get their own hands dirty instead. 

Anyway, this article is for those of you who are looking for a plumber and want to know the basic costs. As you can see, the cost is divided between material and labor costs. 

If you want to save money, you can spend on the material cost, and do the labor yourself with help from Google. Or, if you can’t be bothered about it, just call the nearest plumber to do everything for you!

1 thought on “How Much Does It Cost to Replace a Bathroom, Kitchen, Bathtub, Shower, and Outside Faucet?”

  1. Pingback: Is Drano Safe for Shower Drains? -

Comments are closed.