Where Is The Reset Button On InsinkErator Badger 1?

So, now that food scraps and debris are lodged into your garbage disposal, what should you do? The answer is simple – all you have to do is dislodge the items by following a few steps and then reset your garbage disposal using the red button.

Other than the occasional clogs, another murky situation that you might face is when you’re not adequately accustomed to all the parts of the garbage disposal. Questions like where is the red reset button on your InksinkErator must populate your worries.

Worry not, before your Badger 1 gets jammed and suffers from a motor overload again, allow me to help you with the solution. Once you locate the red reset button, your pathway must become stress and hassle-free.

How To Reset Keurig Coffee Maker
How To Reset Keurig Coffee Maker

Hence, keep reading and stay informed!

Where Is The Reset Button On InsinkErator Badger 1?

You can locate the red reset button at the bottom of your InsinkErator Badger 1. To be very specific, there are two possible regions where the red button could reside on your garbage disposal, the lower back or at the bottom. 

It might be even easier to locate the red button during a clog. When the InsinkErator suffers from a clog, the motor gets overloaded, and the reset button pops out of its place to turn off the garbage disposal.

The sole purpose for this red reset button mounted beneath the canister is so that when necessary, the user can push it down and reset the entire system’s breaker.

However, you must keep in mind that before you push the button at the first opportunity, you must unclog the impellers and rid the disposal of the debris and food wastes. If this integral step is missed out, the machine will shut off again.

The first signs of having to use the red reset button are when your InsinkErator Badger 1 automatically stops working. During an extensive jam or clog, the garbage disposal stops on its own to refrain from further damaging its internal components.

Needless to say, the problem must lie within the grinding or impeller chamber, due to which the overload protector must have tripped. If the issue is minor, you can simply utilize the wrench that the garbage disposal comes with.

Insert the wrench in the hole located at the bottom of the garbage disposal and crank it. Work in a back and fro motion for it to work.

But, what can you do when your Insinkerator garbage disposal just won’t turn on? It can be highly frustrating, and simply pushing the red reset button right off the bat might not cut it and do the trick. 

Don’t break into a sweat yet. I’m here to tell you what you can do in such troubling circumstances. Keep reading and follow these steps.

  1. Ensure that the Insinkerator garbage disposal is plugged in.
  2. Once you review and ensure that it is plugged in, you need to locate the red reset button. The red reset button must be located at the bottom of your Badger 1’s canister.
  3. After pressing the red button, if you see no evident change, then you must check the primary service panel. Often when the red reset button doesn’t work, it means that the circuit breaker may have tripped.

If that’s the case, you can either fix it yourself if you have abundant knowledge in the subject or acquire professional help. The benefit of getting professional help is that even though it will cost you a few extra bucks, you know that the job will be done precisely.

How Do I Reset My Badger 1 InSinkErator?

When your garbage disposal resists functioning or turning on, you will have to use the red reset button. Moreover, when your garbage disposal is clogged or has been jammed for a prolonged period of time, it will eventually overheat.

This phenomenon and the automatic shutdown mechanism could cause a good few issues for your garbage disposal. Fortunately, when such troubleshoots occur and the overload protector trips, the red button will pop out at 5mm or at a quarter of an inch.

Therefore, to reset your InSinkErator at this point, you can follow the steps that I’ve illustrated below. 

  1. Switch off the garbage disposal. Disconnect and disengage all the electrical connectivity and ensure to turn the garbage disposal to the ‘off’ state.

Pro tip: You must ensure that all kinds of electrical and water connectivity has been shut down and disengaged before beginning and moving onto the next steps. Since garbage disposals rely on water and electrical supply, there are higher chances of accidents.

In order to avoid mishaps such as getting electrocuted, you need to double check before you begin.

  1. Locate the red reset button below the canister and press the red button. If, after pressing down, the button doesn’t remain retracted, you shall wait around ten to fifteen minutes and retry.
  2. Once that’s done, turn on the cold stream on your faucet and switch on the InSinkErator garbage disposal. Afterward, the garbage disposal should run smoothly.

If, however, the InSinkErator garbage disposal’s red reset button still doesn’t stay retracted even though after multiple tries on resetting, you might have to turn in for professional help or replace the equipment altogether.

Final Words:

The bottom line is that even if you don’t have a clog or jam in your garbage disposal currently, it’s essential to know where the red reset button is located on your InSinkErator Badger 1.

Garbage disposals can serve you for a very long time; however, even in this long run, it is evident for your Badger 1 to endure minimal wear and clogs once every now and then. So, the question is, are you doing the most in terms of taking care of your InSinkErator Badger 1?

The key to prolonging your garbage disposal’s lifetime is maintaining consistency with its instructions manual and taking good aftercare. 

Once you comply with these, who knows? Maybe you wouldn’t have to use the red reset button, after all!